
Soaring air conditioning bills
Rooms facing south, west or the sea push your air conditioning to run longer and at higher power all summer long.
Certified 3M, Avery Dennison and Llumar installer across Spain
Up to 85% less solar energy through your windows, with no construction or room closures.
Every summer, the rooms and common areas with the most glass become your biggest source of energy cost and comfort complaints.

Rooms facing south, west or the sea push your air conditioning to run longer and at higher power all summer long.
Heat and glare in the room are a recurring complaint in guest surveys and on Booking or TripAdvisor reviews.
UV rays degrade curtains, upholstery and flooring in suites, restaurants and lounges with large glazed areas.
Indoor pools, spas, restaurants and skylights take direct radiation, causing glare and overheating.
Chains, booking platforms and certifications like Travelife or Green Key demand real energy-efficiency indicators.
Replacing glazing or installing awnings and blinds means construction, high cost, and often the loss of views and natural light.
The solution
A micro-thin layer applied to your existing glass. It reflects infrared radiation back outside before it turns into heat inside the room.
No glass or frame replacement: from the inside or outside depending on the project.
The metallised and ceramic layer sends most solar radiation back outside.
Unlike awnings, blinds or tinted glass, it keeps high visible-light transmission.
Less heat load comes in, so the system needs fewer hours and less power.
Performance data per the manufacturers' technical data sheets: Avery Dennison / Hanita Silver 20 Xtra (total solar energy) and 3M™ Prestige 40 (infrared and UV).
| Solar film | Double glazing | Awnings / blinds | |
|---|---|---|---|
| Construction work needed | None | Yes, full replacement | Exterior installation |
| Hotel stays operational | Yes, no room closures | Very limited | Partial |
| Preserves views and daylight | Yes | Yes | No, blocks them |
| UV ray blocking | Up to 99.9% | Variable | High only when closed |
| Investment cost | Low | Very high | Medium |
| Installation time | Days | Weeks or months | Days |
Performance figures for the films we install in our flagship hotel projects.
With Avery Dennison / Hanita Silver 20 Xtra, the film at Ocean Drive and Ses Estaques. Less heat load, fewer hours of air conditioning at full power.
The main driver of indoor heat build-up is reflected back outside before it reaches the room.
Protects furniture, curtains, upholstery and artwork from premature fading.
Installed onto existing glass, without affecting the structure or hotel operations.
No darkening or distortion of the glass: your rooms stay bright.
Cutting heat load contributes to the indicators behind hospitality sustainability certifications.
*85% total solar energy rejected per the Avery Dennison / Hanita Silver 20 Xtra technical data sheet. 97% infrared and 99.9% UV per the 3M™ Prestige 40 technical data sheet. The exact result for your property depends on orientation, glass type and glazed area: we calculate it in your free energy assessment.
Sun-facing facades and terraces with views: the areas with the highest solar load and cooling cost.
Large panoramic glazing without losing the brightness or the views that sell the dining experience.
Specific films for skylights and large horizontal surfaces, with maximum UV protection.
The guest's first impression, always bright and without the overheating of large window walls.
Security and anti-vandalism films for ground floors and entrances, which also protect against accidental breakage.
If your hotel operates vessels or its own beach club, we also protect marine glazing against sun and salt.
Real proof, not a promise
Flagship projects executed with the same film we recommend for high-exposure facades.

One of the Mediterranean's leading environmentally-committed luxury resorts trusted us to reinforce the energy efficiency of its glazed facades.

A historic 5-star hotel in Mallorca, with expansive glazing facing the Bay of Palma, where solar control is key to guest comfort.









We visit your hotel, measure orientation and glass type, and identify the areas with the highest solar load.
We select the right film for each facade and use: solar control, UV, security or skylights.
Room by room or by common area, outside peak occupancy hours whenever you need it.
Periodic reviews and manufacturer warranty from 3M, Avery Dennison or Llumar on every installation.
Frequently asked questions
It depends on orientation, glass type and glazed surface area for each property. 3M™ Prestige 40, the film installed at Six Senses Ibiza, rejects 97% of infrared radiation, and Avery Dennison / Hanita Silver 20 Xtra, installed in Ibiza hotels such as Ocean Drive and Ses Estaques, rejects up to 85% of total solar energy. This directly cuts the heat load your air conditioning has to offset. We provide a specific estimate for your property in the free energy assessment.
Not in any noticeable way with the premium ranges we install. Films such as 3M™ Prestige are engineered to keep high visible light transmission while blocking heat and UV rays, so views and room brightness are preserved.
Yes. We work in phases and outside peak occupancy hours, room by room or by common area, so hotel operations and the guest experience are not interrupted.
Yes, we work with hotels nationwide. To visit your property and prepare the energy assessment we coordinate our team's travel, whether your hotel is on the coast or inland.
The price depends on the square metres of glass, the facade height, the access needed (scaffolding or platforms) and the film range chosen. That is why we calculate it after the free assessment and give you a detailed written proposal.
It depends on the surface area, but it is measured in days, not weeks or months. We organise the schedule in phases with the hotel management so occupancy is not affected.
Yes, we offer specific films for skylights and large horizontal glazed surfaces, as well as UV protection films for spas, indoor pools and restaurants.
Reducing heat load and cooling consumption contributes to a building's energy efficiency indicators, an increasingly relevant factor for sustainability certifications and the energy ratings required in the hospitality sector.
We install products from leading manufacturers such as 3M, Avery Dennison and Llumar, backed by manufacturer warranty. We detail the specific terms for each range in your personalised hotel assessment.
Tell us which hotel or building you want to protect. We assess your facades and tell you how much heat, and how much cooling cost, you can keep out this summer.
We have received your details and will contact you to arrange the technical visit.